- DomuStair

- DomusLift

- DomusDoor

DOMUSPLAT

The hydraulic lifting platform DOMUSPLAT successfully removes architectural barriers, without expensive costs, in case of reduced rises (up to 2 metres).
Installation can be easily carried out both inside and outside buildings.
The standard superior platform is covered with non-slipping material.
Landing and onboard pushbutton panels operate with low tension (24 V).
Standard power supply is three-phase 230/400 V, or alternatively 230 V single-phase.

LOW RISE PLATFORM WITHOUT SHAFT

When it is not possible to build an enclosed shaft with landing doors, DOMUSPLAT, in its �without shaft� type, is available.
The lifting machine is hydraulic type.
The platform can be manufactured with the control unit (hydraulic power unit, tank and control panel) both in the machine and separately. This latter solution is especially suggested in order to ease maintenance and repair operations.
All systems can be provided with emergency down travel directly operated from the platform.
On the free sides under the platform, a protection which prevents from accessing the area below, avoiding the risk of crushing, is installed

LOW RISE PLATFORM WITH ENCLOSED SHAFT

The DOMUSPLAT lifting platform with enclosed shaft moves vertically to serve established floors or levels up to a maximum rise of 2 metres.
If an enclosed shaft with landing doors for users safety is not provided, DOMUSPLAT can be supplied with metal profiles structure and glass or sheet steel cladding.
The lower door and the superior gate, manually operated, can be glass or sheet steel cladded. They are also provided with a safety lock.
The standard model is supplied with emergency downward travel manually operated and maximum pressure gauge in order to avoid platform overloads.